- Store
- >
- Alternator/ PS/AC Brackets Chevy Inline 6
- >
- Tight mount Alternator 292
Tight mount Alternator 292
NEW ALTERNATOR BRACKET FROM DAVIS SPEED EQUIPMENT. MOUNTS A 10SI, 12SI or CS130 CASED GM ALTERNATOR
TO ANY 1963-89 292 GM INLINE ENGINE THAT HAS THE TWO TAPPED HOLES AT THE FRONT
CORNER OF THE ENGINE BLOCK AND IS USING A BALANCER WITH THE WIDE SPACE AT THE REAR. SEE PICS FOR REFERENCE.
BRACKET IS PLAIN STEEL AND COMES READY TO PAINT. JUST CLEAN WITH SOLVENT AND PAINT.
COMES WITH HARDWARE AND INSTRUCTIONS.
DOES NOT INCLUDE ALTERNATOR OR BELT.
THE TIGHT FIT SERIES IS SPECIFICALLY DESIGNED FOR RETROFITTING THESE ENGINES INTO 1948
AND EARLIER CARS AND 1955 FIRST SERIES AND OLDER TRUCKS, HOWEVER, THIS ALTERNATOR
BRACKET WILL ALSO WORK IN ANY NEWER APPLICATION AS WELL.
REQUIREMENTS:
1) 1963-89 VINTAGE 292 ENGINE WITH TWO 7/16-14 TAPPED HOLES AT THE FRONT CORNER OF BLOCK.
2) BALANCER WITH WIDE SPACE AT REAR.
3) 10SI, 12SI or CS130 CASED ALTERNATOR. SEE DIMNESIONAL DRAWING.
DOES NOT WORK WITH:
1) 292 WITH BALANCER THAT HAS THE GROOVE AT THE REAR. PLEASE SEE 10022 INSTEAD.
2) ANY OF THESE ENGINES THAT DON’T HAVE THE TWO 7/16-14 TAPPED HOLES.
NOTES OF INTEREST:
IF YOU DO NOT HAVE THE TWO TAPPED HOLES AS SHOWN, THEN PLEASE SEE PART 10000 INSTEAD.
CLEARS ALL HEADERS.